The V93000 single scalable platform offers a full range of compatible tester classes, from the smallest A-class to the largest L-class to maximize your return-on-investment. The class determines the possible size of the configuration and allows to fit the size and performance of the tested device. All features and performance points are available in all classes.
All card types fit in all test heads, which provide the same power, cooling and computer interfacing to each card, independent of tester size. DUT boards can be exchanged, as well as test programs. The scalable design is a key capability to enable outstanding device portfolio coverage and test cost advantages in one single test platform.
Verigy 93k Tester Manuall
Today the company is known as Verigy and they are considered a powerhouse of semiconductor Automatic Test Equipment (ATE) But when the 93000 was introduced in 1999, the company was more well known for its instruments. That changed because HP moved the tester to the chip and into the test head (note how big it was). This enabled a chip maker to test most of its product line with single-scalable-architecture. Better yet, they broke the $1000-per-pin cost floor on the low end, while on the high end they could break Gbps speeds. It quickly became a true landmark, as most top-end SOC testers after it would copy the system's architecture for many years to come.
The TestInsight tools support all popular Automatic Test Equipment and semiconductor IC tester platforms by Advantest, Teradyne, Cohu, NI and more, such as 93K / V93000, T2K / T2000, ATP, J750, J750ex, Flex, UltraFlex, Eagle, ets364, ets800, IG-XL and DiamondX. Use the table below to find the right tool for your specific project.
An in-depth work history analysis of prospective manual testers for your company is a crucial step when hiring. The recruiter has to validate that the applicant can demonstrate all skills and experience cited in the credentials and reference letters. You also want to discern how well they related with their previous employers, colleagues, and customers. This will give an insightful snippet into knowing the soft skills of your new hire and the best ways to work with them.
A testbed is a digital platform for carrying out tests. A typical testbed consists of a web app, the operating system, the software being tested, and other tools that facilitate the process. For manual testing, the testbed is the testers device and operating system with which they will carry out the end-user oriented tests.
Errors are the most common inconsistencies observed by the team of testers during the app development phase. They are created by coders during the building of the program or construction of the layout.
The major drawback of manual testing is that it can take time to be completed, unlike automated tests which have fixed time frames. Also, if a wrong tester is hired, he/she will give the wrong test results, thereby painting a wrong picture of the software requirements. Thus finding the right manual tester is of high priority.
The major difference in manual testing vs automation testing is that a manual test is carried out by a human tester, while automation testing is carried out in a digital test environment. Manual testing is done to mirror the end-user experience, while automation testing cannot exactly mimic how a human would use the software.
Code execution is not necessary during a static test. The testing can be carried out manually with a collection of techniques and tools. This kind of evaluation includes the study of the source; review of data for requirements; and analysis of the documentation.
Throughout the phase, the testers give comments on each examined document. You can proceed to security audit and evaluate the program under runtime-free settings. But that is only possible if the user interface is unlaunched and the program is unoperational.
Dynamic testing, being the opposite, is feasible once the program becomes operational and the user interface is excited. Unlike static testing, dynamic testing is done under real run-time settings. The tester must have feedback and aligns the output with this result.
Experienced-reliant tests are mostly about exploration, examination, and understanding. The tester continuously analyzes the software, using his expertise, attributes, and knowledge to establish test plans and test cases to execute the required tests. Different experience-based assessment methods are accessible. These could be:
Boundary value analysis provides good test cases because they confine the test to a selected range of values, and the test can never exceed the original set values. It helps testers fine-tune a procedure to a specific range of requirements, such as lower to upper, start to end, inside to outside, minimum to maximum, 1 to 10, etc. It also saves time.
This test-orientation and tester, respectively, hardware-abstraction is consequently used in SmarTest 8, for test setup descriptions, application programming interfaces (APIs), access to results, and in debug tools. This makes the software intuitive and easy to learn, and the test programs are easy to develop, understand and debug, further lightening the burden for the test engineer.
about an SOC tester at which various components such as digital channels, their . how this concept is applied to a digital channel as 1-bit digitizer in Verigy 93000 SOC sys- .. have implemented a set of instructions when using this interface.
Tester Software Version: C.03.08Fully populated test headDetailed cofiguration is as blelow:VERIGY V5400 Wafer Sort testerTSM: 36Total test sites: 144 Total I/O: 4608Total DPS: 432Total PMU: 144Total ADC: 36TSC: PPCAlgorithmic pattern generator: standard (CAPG only)PPS: PPS12PE channels: PE32BM: 8MECR: 128MFront plane interface: STD-PEFPIFStandard manipulator: 1Clock module: 4 (50 MHz)DC / DC module: 8Back plane: 4AC / DC module: 4 (7 kW)SSIC: 1PDU: 1
Wow that was good to know! This tutorial show how to use a digital multimeter (DMM), an indispensable tool that can use to diagnose circuits. The most basic things we measure are voltage and current. A multimeter is also great for some basic sanity checks and troubleshooting. Now this tester is also available which makes electrical testing easier with a wide range of multifunction testing accessories and ancillaries.Thanks
To test for local dimming, we use a video with a moving bright object to see how well the local dimming feature affects different aspects of the picture quality. Multiple testers subjectively assign a score to the overall local dimming performance by comparing it to other TVs. During the test, we make sure the local dimming feature is enabled and we adjust the backlight to have a brightness of 100 cd/m2. 2ff7e9595c
Comentarios